NOTE: Starting with this version, no CD-check is performed by the
main program and all documentation is supported only in PDF format,
available from the Help menu in each application.

Changes for Fulda Gap '85 1.07
    - Added Magnified 2D view with 2x sized graphics.
    - Change so that Disrupted units do not receive replacements and
      Detached units receive replacements at one-fourth (not one-half) the
      normal rate.
    - Added new Forced Bridge Crossing Rule which allows units to force a
      bridge crossing against enemy ZOC (see Users Manual under Movement).
    - Increased Engineer digging in bonus from 2x to 3x.
    - Added toolbar button for highlighting units in Travel Mode.
    - Added new Bunker and Mine Prob Parameter Data Values and allowing
      non-bridge engineer units to construct Bunkers.
    - Added new Night Move Disruption parameter data value which determines
      probability of night movement by non-rail and non-travel or
      non-road movement units causing Disruption.
    - Change so that Interdiction attacks have twice the chance of Disruption
      and can cause the loss of up to half the movement allowance in movement
      points.
    - Added a range 1 hard target artillery fire modifier (see Users Manual
      under Firing).
    - Added Optional Rule for delayed reporting of enemy Disruption.
    - Change so that towed AT gun unit which changes to Travel Mode after
      firing at most once before the change will not trigger enemy
      Opportunity Fire.
    - Added Quality Fire Modifier Parameter Data Value which applies to
      quality A and B units.
    - Change so that half Frozen Penalty is applied only to Urban (Village,
      Town, City, and Industrial) hexes.

Changes for Fulda Gap '85 1.06
    - Change so that for an HQ unit, both the actual and nominal command range
      are displayed in the alternate hex info area (actual/nominal), the
      Command Range view option uses the actual Command Range, while the
      Maximum Range view option shows the Nominal Command Range (see the
      Command section of the Users Manual).
    - Added current date and time to Scheduled Dialog.
    - Added the ability for special forces to blow bridges and damage AT
      trenches.
    - Change so that Saving Movement Points will save enough points for a
      towed artillery unit to unlimber at the end of its movement.
    - Change so that platoon units that are not combined with other platoons
      do not exert a Zone-of-Control.
    - Change so that Partisans and Special Forces can move from one enemy ZOC
      to another.
    - Change so that Special Forces are always in command and never isolated.
    - Added non-persistent chemical and tactical nuclear weapons.
    - Added ability to flag individual units as having chem or nuke weapons
      and for those units to use those weapons at a range of 1 or less.
    - Added optional rule to prevent flying helicopters and non-man-carrying
      helicopters from blocking the retreat of ground units.
    - Change so that flying helicopters and any non-man-carrying helicopters
      do not block supply.
    - Change to allow Battleships to fire AA at high flying aircraft.

Changes for Fulda Gap '85 1.05
    - Change so that indirect fire is twice as disruptive to HQ units as
      normal.
    - Added new Quality Fatigue Modifier optional rule.
    - Change to Rail Movement so that units in Rail Mode do not count against
      the total stacking in a hex, only against other units in Rail Mode.
    - Added new Partisan unit type (see Users Manual in section on Movement).
    - Added Partisan reinforcement type which moves to adjacent hex when
      arrival hex is occupied.
    - Change to allow hexside ferries to convey Supply.
    - Change to allow Engineers to ferry supply one hex across a river so that
      units on the other side are not Isolated.
    - Detached units are displayed with their unit name in yellow.
    - Change so that indirect fire and airstrikes spotted by only Detached
      units are half value.
    - Split Air Strike Hex Limits into two values, one for each side.
    - Added new Patrolling feature to use against Partisans and for spotting.
    - Added the ability for an organization to receive Replacements in
      addition to the standard unit strength recovery feature (see Order of
      Battle editor and Users Manual under Combat Results).
    - Change so that the command range displayed in the alternate hex info
      area for an HQ unit and the command range view option use the Nominal
      Command Range instead of the Modified Command Range value (see the
      Command section of the Users Manual).
    - Added ability for engineers to abandon an engineering bridge (see
      Engineer Menu).
    - (Editor) Added the ability to define a Direct AI Order.
    - (Editor) Added "A" hotkey for toggling Stockpile status.
    - (Editor) Added the ability to highlight a single unit which allows AI
      orders to be given to individual units.
    - (Editor) Added the ability to assign AI Orders to specific Operations
      in Strategies (See AI Order Dialog).
    - (Editor) Added the ability to write a scenario summary to a text file
      (see File Menu).
    - Added new Parameter Data Editor (mcparam.exe).
    - Added new Submap Editor (mcsub.exe).
    - Change so that bridge engineer companies have a lower probability of
      creating bridges than bridge engineer battalions.
    - (Editor) Added ability to determine units which have no on-map HQ under
      File Menu.
    - Added new Frozen Penalty rules (see Environment section of Users Manual).
    - Change so that units with Hard Attack values of range 0 only have those
      attack values affect assaults under the optional Alternate Assault rule
      and not default assaults.
    - Changes to AT Guns including no ZOC, ability to retreat after assault,
      and increased disruption against hard vehicles.
    - Changes to Heavy AA Guns including no ZOC and increased disruption
      against hard vehicles.
    - In File Selection Dialog, it is now possible to list new scenarios
      based on the length of the scenario.
    - Change so that F quality units can recover from Disruption and Broken.

Changes for Fulda Gap '85 1.04
    - Added ability to view wired bridges in Scenario Editor under View Menu.
    - Change so that Broken Helicopter units do not get reduced fire against
      them as other Broken units do.
    - Documented fact that units cannot recover Fatigue in Chemical hexes.
    - Added a new Auto Move feature that automatically moves divisions in
      columns (See AI Orders feature in Main Program help file).
    - Change so that the use of AI Orders does not invoke additional AI
      actions.
    - (Editor) Added hotkey "C" for combine/breakdown command.

Changes for Fulda Gap '85 1.03a
    - Modification so that F5-F8 now affect PBEM replay speed.
    - Change so that units that suffer a minefield attack lose movement points
      equal to S / 3 of their allowance, where S is the strength of the
      minefield (1, 2, or 3).
    - Fix for Alternative Fire range bug.
    - (PDT) Change to maximum stacking from 3200 to 2400.

Changes for Fulda Gap '85 1.03
    - New implementation of DirectPlay which fixes DirectX 9 problems.
    - Change so that HQ units cannot initiate Digging-In.
    - Added total Victory Points of each side to Strength Dialog.
    - Added a new Storm weather feature (see the Environment in the Users
      Manual).
    - Change to move logic so that bridges can be crossed in the presence
      of Rubble.
    - Added ability to define small bridges as "Wired" and added an
      Auto-Bridge Demolition feature using Parameter Data values.
    - Added new Limited Air Recon optional rule (see Main Program documentation
      under Optional Rules Dialog).
    - Added ability to add Ferries to a scenario using the Scenario Editor and
      for those Ferries to be used by units to cross rivers and canals (see
      Hexes Menu in Scenario Editor for how to create Ferries, the Command menu
      in Main Program for how to destroy Ferries, and the Movement section of
      the Users Manual for how to cross rivers and canals using Ferries).
    - Added new Congestion feature which affects movement through a hex
      for a specified side (see Movement in Users Manual).
    - Added ability to designate a Corps or other organization as not
      being able to attach to or from (see Order of Battle Editor).
    - Change so that Amphibious units must be in Travel Mode and cannot be
      Disrupted or Broken to cross a River or Canal.
    - Fixed bug that prevented Air Interdiction.
    - (Editor) Added ability to define a Release as "Fixing" which causes units
      in the specified organization to become Fixed when the Release is
      invoked.
    - (Editor) Added ability to "tie" reinforcements together so they all
      arrive at the same time by having all reinforcements in the group
      after the first have an arrival probability of 0 (see Reinforce
      Dialog in the Scenario Editor).
    - (Editor) Added ability to define a reinforcement as "Check Once Daily"
      which causes the arrival of the reinforcement to only be checked once
      a day at the same time as the original arrival date.
    - (Editor) Added ability to determine Fixed units with no Release
      under File Menu.
    - (Editor) Added ability to define a turn that an Active AI Order
      takes effect.
    - (Editor) Added ability to define multiple AI Orders for the same
      organization as long as they occur on different turns.
    - (Editor) Added "E" hot key for toggling Fixed status.
    - (PDT) Changed range modifier from 1/3 to 1/2 to agree with Korea '85.
    
Changes for Fulda Gap '85 1.02
    - Added a new On-Map Results feature which shows combat results on the
      map instead on in a dialog box.  Feature can be turned on/off from the
      Settings Menu and defaults to on.
    - Modification in Digging-In probability for battalions and combined
      companies (see Users Manual under Movement).
    - Added ability to change the Quality of Organizations in the OB Editor.
    - Added ability to flag a unit as a Demolition Unit (see OB Editor Manual
      and Users Manual under Engineers and Assaults).
    - Added ability to flag units as Low Reliability which increases their
      chance of Breakdown (see Movement in Users Manual).
    - Fix for Low Visibility Air Availability bug.
    - Fix for missing 3D Chemical Marker.
    - Added new "Sub Scenario" feature to Scenario Editor for creating
      sub-scenarios using sub-maps (see Scenario Menu in Scenario Editor).
    - Change so that SP artillery is not subject to Setting Up provided its
      side Setting Up value is at least 90%.
    - Added Fast AI Processing option under AI Menu equivalent to F8 hot key.
      Change so that F8 setting automatically turns of sound effects during
      the AI turn.  This allows the player to play their turn normally with
      full sound effects and still have high-speed AI turns.
    - (Scn) Scenario updates courtesy of Mark Breed aka CptCav at theblitz.org.

Changes for Fulda Gap '85 1.01
    - Change to Fatigue accumulation factor from 3 to 2 (see Fatigue section
      of Users Manual).
    - Added Hot Key "P" for displaying the Organization Dialog.
    - Added Alternative Scrolling Setting for cases where default scrolling
      causes video display problems.
    - Supply Sources are now retained when the Explicit Supply Optional Rule
      is in effect for the purpose of determining Isolation only.
    - Added the ability to Shade protected reinforcement hexes (see View Menu
      in Main Program Manual).

Changes for Fulda Gap '85 1.0
    - Added Electronic Warfare feature that includes both a Jamming and
      Detection feature with respect to HQ units (see Command section of
      Users Manual).
    - Added ability to fire artillery mines in a scenario based on
      scenario header information (see Firing section of Users Manual).
    - Added Thermal Imaging Sight (TIS) attribute to units that affects their
      fire combat with other units (see Firing section of Users Manual).
    - Several changes to Helicopter rules including ZOC and movement rules
      (see Movement section of Users Manual).